How to draw the dimension with Leader

How to draw the dimension with Leader

To draw the dimension with Leader

Step 1

To draw the dimension with Leader, the first thing you need to do is to use the mouse to open the Draw menu. Then, you need to open the Dimension menu and click the Leader command.

Step 2

Next, you ought to place the insertion point to where you want to insert it.

Step 3

Now, just use the mouse to specify the start point and specify the end point. If you want to continue the drawing, go to step 1 and if you want to finish the drawing, go to the next step. Finally, press the Esc key to finish the drawing.

How to draw the dimension with the Ordinate

How to draw the dimension with the Ordinate

To draw the dimension with the Ordinate

Step 1

To draw the dimension with the Ordinate, the first thing you need to do is to use the mouse to open the Draw menu. Then, open the Dimension menu and click the Diameter command.

Step 2

Next, you need to place the insertion point to where you want to insert it.

Step 3

Next, you must use the mouse to specify the start point specify the end point. If you want to continue the drawing, go to step 1 and if you want to finish the drawing, go to the next step. Finally, press the Esc key to finish the drawing.

How to draw the dimension with Centerline

How to draw the dimension with Centerline

To draw the dimension with Centerline

Step 1

To draw the dimension with Centerline, the first thing you need to do is to use the mouse to open the Draw menu. Then, you need to open the Dimension menu and click the Diameter command.

Step 2

Next, you need to place the insertion point to where you want to insert it.

Step 3

After that, you need to use the mouse to paste the Diameter in the circle. Finally, press the Esc key to finish the drawing.

How to draw the dimension with the Diameter

How to draw the dimension with the Diameter

To draw the dimension with the Diameter

Step 1

To draw the dimension with the Diameter, first you need to use the mouse to open the Draw menu. Then, open the Dimension menu and click the Diameter command.

Step 2

Later, you have to place the insertion point to where you want to insert it.

Step 3

Now, use the mouse to paste the Diameter in the circle. Finally, press the Esc key to finish the drawing.